Archives: News / Press

 
STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces that Mel Parrish, FSO and Director of Training Materials, was recognized with a Distinguished Committee Service Award during the recent IPC Midwest Conference & Exhibition. IPC — Association Connecting Electronics Industries® presented the award to Parrish for his participation in creating the IPC-AJ-820, Assembly and Joining Handbook.
 
Mel continues to support the IPC as a General Chair for Product Assurance 7-30 and TAEC lifetime member. The product assurance team is responsible for many IPC technical documents including the newly released IPC-AJ-820 “Assembly Joining Handbook”, IPC-A-610, IPC-7711/21, IPC-A-600, IPC-A-620 and others.
 
After retiring from his work as an electronics curriculum designer for the Air Force, Parrish continued to work with standards development and training as president of Manufacturing Technology Training Center (MTTC) and worked with the Navy at China Lake during the generation of WS-6536 through MIL-STD-2000. In addition to his IPC Master Instructor status for IPC-A-610, IPC-A-620, J-STD-001, Parrish has previous DoD certifications for WS-6536, DoD-STD-2000 and MIL-STD-2000.
 
Complementing his expertise in electronics manufacturing, Parrish has more than 30 years of experience in workforce development, skills standards, curriculum design and development, and management for electronic technology and production disciplines.
 
For more information about STI Electronics Inc.’s products and services, visit www.stielectronicsinc.com.
 

MADISON, AL — August 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces the appointment of ETECH-trainingen as its training materials distributor in The Netherlands.

ETECH-trainingen is an international consultancy, training and certification institute that provides practical customized training especially for the electronics manufacturing industry.
Established in 2009 by Ramon Essers, the company is headquartered in Kerkrade between Maastricht (Netherlands) and Aachen (Germany). ETECH-trainingen is an authorized IPC Distributor and provides IPC training including IPC-A-600, IPC-A-610, IPC 7711&7721 and IPC/WHMA-A-620.
 
“ETECH will make purchasing STI materials easier and more accessible to our customers in the global markets.  We are looking forward to supporting our international customer base with ETECH and its capable staff by our side,” commented David Raby, President & CEO.
 
 
In addition to its standardized training program support materials, STI Electronics provides unique or custom training materials ranging from chip scale and BGA to through-hole and terminal attachments. STI also provides cable and harness kits to support cable fabrication programs. Process development kits for machine applications provide an opportunity to evaluate operation capabilities for issues such as fine-pitch production and lead-free materials.

ETECH-trainingen will represent STI’s complete line of training materials throughout the Netherlands, Belgium and Luxembourg.  For more information about ETECH-trainingen, call Ramon Essers +31 (0) 45 – 7 11 23 90 or visit www.etech-trainingen.nl/en/.

MADISON, AL — August 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces Ann Duncan’s 15-year anniversary.
 
“Ann has been and continues to be a valued part of STI and especially our Training Services Department. Her attention to detail and exceptional customer service has played a large part in the tremendous growth that Training Services has seen over the past few years. We have all enjoyed working with Ann and look forward to the next 15 years with her,” said David Raby, President & CEO.
 
As STI’s Training Services Coordinator, Ann handles training services inquiries, registrations, schedules and logistics of off-site classes. She has a wealth of knowledge when it comes to STI’s Training Services Department, which offers a wide variety of soldering training programs ranging from commercial to high reliability requirements. STI is an approved IPC Certification Center for all IPC training programs.

 
STI Electronics, Inc. Continues Growth Streak – Cathy Cross Joins the Team as Outside Sales Rep for AL, GA and FL
 
MADISON, AL — August 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces the appointment of Cathy Cross as its outside sales representative for FL and the southern regions of AL and GA.
 
“Cathy brings a tremendous amount of experience in various aspects of electronic manufacturing support.  She will be a tremendous asset to STI and customers alike.  We are looking forward to working with Cathy and I am sure the customers in her territory will greatly benefit from her expertise and knowledge,” commented David Raby, President & CEO.
 
In her new role, Cathy is responsible for establishing and maintaining relationships with new customers in the region as well as actively prospecting for new accounts. Additionally, she will maintain the company’s relationships with existing customers in her territory.
 
Cathy brings more than 25 years of industry experience and has supported the commercial and government defense industries in various roles throughout her career. She has experience developing and writing training curriculum, as well as coordinating and teaching technical training programs. Cathy is an IPC-A-610 and J-STD-001 Certified Instructor (CIT), CAT C MIL-STD-2000 Solder Instructor, and has her ISO 9000/9001 Lead Auditor Certification. 

MADISON, AL — June 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, will exhibit at the Space and Missile Defense Conference, scheduled to take place August 13-16, 2012 at the Von Braun Center in Huntsville, AL.
“We look forward to meeting with customers and professionals from the space and defense community to discuss technology solutions and future capabilities in the industry. Our Engineering Services Department offers customized test protocols and performs electrical, environmental, and mechanical testing in compliance with various EIA/JEDEC, IEC, AEC, ASTM, IPC, and MIL standards,” said David Raby, President/CEO.
 
STI’s Engineering Services Department will feature its IC/DT services. STI’s Engineering Services division is a multifaceted technical organization that provides engineering support in the field of electronics manufacturing. From product design and manufacturability analysis to pre-production prototype and development, STI’s Prototype and Development Lab is a full service design review and pre-production facility.
 
For more information about STI’s engineering services, visit www.stielectronicsinc.com.
 
###
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.

MADISON, AL — June 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, will hold a Certified IPC Trainer (CIT) Certification Course on the J-STD-001E Standard. The course, titled “Requirement for Soldered Electrical and Electronic Assemblies,” is scheduled to take place September 10-14, 2012 at Hakko’s facility in Valencia, CA.
 
STI has extensive experience in curriculum development and has worked with IPC numerous times in previous years to develop and/or update curriculum for IPC-A-610, J-STD-001, IPC-A-620 and IPC-7711/7721.
 
This course will provide skill-based training regarding soldering practices and processes as covered in the J-STD-001E and its companion documents. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs. For more information or to register for the course, visit www.stielectronicsinc.com.
 
Please contact Ann Duncan with any questions at 256-705-5512 or e-mail aduncan@stielectronicsinc.com.
 
###
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.

STI’s Jack Harris to Co-Chair Free Technical Session during SMTA International
 
MADISON, AL — September 2012 — STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces that Jack Harris will Co-Chair a free technical session at the upcoming SMTA International Conference and Expo, scheduled to take place October 16-17, 2012 at the Walt Disney World Dolphin Hotel in Orlando, FL. The session titled “Throughput, Lifespan and Partnering” will take place Wednesday, October 17 from 9:30 – 11a.m. in Exhibit Hall Theatre 4.
 
The session is designed for planners, industrial engineers, quality managers, engineering managers and purchasing staff. Attendees will come away with new knowledge in three areas of parts management: 1) A very cost effective and easy to learn tool for shop floor optimizing; 2) Managing products with a 15-year life span using semiconductor parts available for only five years and; 3) Spurring growth in technology in the United States by partnering public and private resources. 
 
Jack Harris is an Outside Sales Representative for STI. Based in Dallas, TX, Jack has more than 20 years experience supporting electronics and related industries. Jack understands all aspects of sales and customer service, having owned his own company for several years, and most recently was a sales representative supporting this same area. 
 
 
###
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.

STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, in collaboration with Hakko, today announced the dates for its Certified IPC Trainer (CIT) Certification Courses to be held at Hakko’s facility in Valencia, CA.
 
“To accommodate our customers on the west coast, STI and Hakko are working together to bring superior IPC certification courses to our customers. STI is second to none in regards to quality training and overall involvement in creating the specifications and requirements as well as develop the training curriculum,” commented Diana Bradford, VP Operations/Training Resources.
 
STI is a total solutions partner when it comes to training resources. The company offers both training services and materials to better serve companies. STI’s technical and instructional staff is unsurpassed in knowledge and experience in the world of electronics assembly/solder training and specification requirements. The courses planned to-date are as follows:
 

• J-STD-001E:“Requirement for Soldered Electrical and Electronic Assemblies”

Date: September 10-14, 2012
 

• IPC-A-610: “Acceptability of Electronic Assemblies”

Date: October 15-18, 2012
 

• IPC-7711/7721: “Rework, Modification and Repair of Electronic Assemblies”

Date: November 12-16, 2012
For more information or to register for any of the courses, visit www.stielectronicsinc.com. Please contact Ann Duncan with any questions at 256-705-5512 or e-mail aduncan@stielectronicsinc.com.
 
###
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.

STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, announces the appointment of Julio A. Estrada as its newest Instructor for the TX, OK, AR area.
 
“It is easy to see why Mr. Estrada found his true calling as a trainer. He has a great passion to help people understand the government and industry standards.  Julio will be a significant addition to the STI training staff.  Julio is also bilingual and will allow STI to better serve its Hispanic customer base,” commented David Raby, President/CEO. 
 
Mr. Estrada is the newest Instructor/Trainer to join the STI crew.  He brings more than 15 years of experience in training classes in through-hole soldering, cable, harness and crimp assembly, fiber-optic termination, polymeric applications, SMT fabrication and repair, as well as electrostatic discharge (ESD) avoidance for the U.S. government.  In total Mr. Estrada has more than 28 years of experience in the aerospace industry. 
 
Mr. Estrada has trained personnel first on the NHB5300, then on the NASA-STD-8739 Workmanship Standards, and now on the IPC J-STD-001E, including the Space Addendum.    Mr. Estrada has devoted his entire career to helping others achieve their goals by becoming proficient in the work they perform for their employers. He has worked at respected companies including the Johnson Space Center in Houston, Texas and has experience developing course curriculums for premier companies such as NASA.
 
For more information about STI Electronics Inc.’s products and services, visit www.stielectronicsinc.com.
 
###
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.

STI Electronics, Inc., a full service organization providing training services, electronic and industrial distribution, analytical and failure analysis, prototyping, and small- to medium-volume PCB assembly, has signed on a new vendor – Henkel Electronic Materials, a division of Henkel Corporation.
 
STI has added Henkel to its expansive repertoire of electronic assembly and solder supplies. Henkel Electronic Materials manufactures a broad range of electronic materials including adhesives, encapsulants and coatings for a variety of semiconductor and microassembly applications. STI will stock Henkel’s electronic materials effective immediately at its on-site product warehouse
 
“I am very excited to begin this relationship between Henkel and STI. Customers will have STI’s technical resources as support in addition to the experts at Henkel. STI customers from Florida to Texas will now have access to Henkel’s wide array of products at a competitive price from STI’s inventory. This is the beginning of what I expect to be a mutually beneficial arrangement between STI and Henkel,” commented David Raby, President & CEO.
 
Henkel Corporation’s Adhesive Technologies business sector comprises five market- and customer-focused strategic business units: adhesives for consumers, craftsmen and building, transport and metal business, general industry business, packaging, consumer goods and construction adhesives business, and the electronics business.
 
As a distributor of more than 175 different product lines, STI is prepared to support your manufacturing needs for electronic as well as industrial production facilities. Additionally, STI produces a complete line of solder training kits and mechanical components (dummies).
For more information about STI Electronics Inc.’s products and services, visit www.stielectronicsinc.com.
 
###
 
About Henkel CorporationHenkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Cosmetics/Toiletries and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions both in the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs more than 47,000 people and reported sales of 15,605 million euros and adjusted operating profit of 2,029 million euros in fiscal 2011. Henkel’s preferred shares are listed in the German stock index DAX and the company ranks among the Fortune Global 500.
 
About STI Electronics, Inc.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. Additionally, the company distributes products for the electronics and industrial markets. For more information, visit www.stielectronicsinc.com.