IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general…
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00
Description
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
This program is for anyone needing to renew their existing IPC-7711/7721 CIT Certification. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sections 2-10 consist of; Wire Splicing Procedures, Conformal…
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00
Description
This program is for anyone needing to renew their existing IPC-7711/7721 CIT Certification. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sections 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options -
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating…
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness reliability in space environments. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options -
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist…
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general…
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions.
An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Description
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions.
An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Related products
-
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation…
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Description
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class. To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Related products
-
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting…
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control.Modules 2-6 includes hands-on training exercises. Each module consists of 8 classroom hours.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers PCB, Coating, Encapsulation and Staking, Module 4 emphasizes Through-Hole Technology, Module 5 emphasizes Surface Mount Technology and Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on training. Recertification required every 2 years.
Related products
-
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general…
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions.
An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Description
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions.
An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Related products
-
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is…
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00
Description
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced…
J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
| Description |
|---|
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options