Training Kits & Materials

IPC Soldering Introduction Kit

IPC Badge/STEM Kit SST-IPC-S1

IPC-A-610H: Acceptability of Electronic Assemblies

IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types, and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have … Continue reading

IPC-J-STD-001H: Requirements for Soldered Electrical and Electronic Assemblies

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect through-hole solder conditions that are not visible by any other means. IPC-J-STD-001H is a … Continue reading

7711/21C Advanced Rework Repair Certification Kit, Lead Free

7711/21C Advanced Rework Repair Certification Kit, Tin Lead

Meets all the requirements for the IPC 7711/21 Revison C training program and includes many options and special features: Optional components: BGAs, SMT Tantalum Caps, 0201 Resistors Inner layer and multi-layer repair sections (4 layer) Conformal coating already applied to a section Surface conductors already damaged for repair Components with adhesive staking

Polymeric Workmanship Board

Polymeric Workmanship Board A Fully Assembled Board Staking and Conformal Coating Board for Hands-On Training Each Board Contains: Axial leaded resistors, diodes, capacitors, radial leaded capacitors/transistors, terminal/jumper wire, dual in-line package (DIP), quad flat pack(QFP) and crystal for staking. Radial leaded capacitor for bonding. Ball Grid Array for underfill. Hardward for torque (witness) stripe

Wire Holding Fixture (2 spring)

Terminal Holding Block

The STI Terminal Holding fixture provides stable support for individual terminals during soldering and lead forming.

Wire Terminal Kit

Kit; Terminal and Wire Kits are available in varying combinations of terminal types and quantities as well as wire sizes to support certification and training requirements. The standard terminal types are Turret, Gold Cup, Pierced, Bifurcate, and Hook. The wires are all stranded and the wire sizes are easily identified by color. All of the materials are available in Lead Free as well as Tin Lead finish and they can be purchased individually or in kit form.

Transistors

Through-Hole Solder Training Kit

Kit; Through-Hole Solder Training Kits are an economical and reliable way to ensure that each student and each class receives the same project materials. The kits contain a variety of common through-hole component types and wire terminal attachments that are encountered in production. Two variations in component quantities are commonly available. The recertification version of this kit has a reduced number of practice components. These kits are updated versions of the industry standard certification kits created for the Military Certification Programs. There are several additional versions of this PCB available such as Multilayer, without solder mask, without ground plane, etc. As with all of the STI Electronics Training Kits, customized versions of the kits and individual components are available.

Terminals

Surface Mount Transistor D PAK/DD PAK

Surface Mount Training Kit

Kit; SMT Training Kits provide a cost effective and consistent approach to solder training. Instructors no longer have to spend their valuable time keeping track of inventory and looking for scrap production. The parts are packaged in static shielded bags to promote ESD awareness. These SMT kits are a reliable and economical way to ensure that each student and each class receives consistent training materials. The kits contain a variety of common production Surface Mount component types and land patterns that are encountered in today's products. All of the parts are guaranteed solderable. As with all of the STI training kits, customized kits and individual parts are available.

Soldering Skill Evaluation Kit

Kit; The Soldering Skill Evaluation Kit provides an efficient way to determine the skill of a solder operator and is often used to see if additional training is needed. Companies can use this kit to screen potential employees before employment, transition operator skills from Tin Lead to Lead Free soldering, or to assess an operator for skill maintenance during employment. In addition, the kit can be used as a workmanship training project for skill evaluation or enhancement with a very low material and lost labor expense. The kit contains a sampling of Through-Hole, SMT and Wire/Terminal attachments. This kit is available in either a Lead Free or Tin Lead version.

SST-J001-K6-LF Rev F Cert Kit

This revised J-STD-001 Kit provides additional QFP100 components that are 20 mil pitch as well as smaller 0402 chips and DPAKs in a lead free format.

SST-J001-K6 Rev F Cert Kit

SST-J001-K6 Rev F Cert Kit This revised J-STD-001 Kit provides additional QFP100 components that are 20 mil pitch as well as smaller 0402 chips and DPAKs.

Small Outline Integrated Circuit (SOIC)

Small Outline Integrated Circuit (SOIC) 50mil (1.27mm) Pitch

Rework/Repair Training Kit

Kit; Solder Training Kits are required for certifying rework skill for IPC-7711/21. This kit provides two boards that are fully assembled and soldered with an additional set of component parts for removal and replacement training exercises. This kit is available in either a LEAD FREE or a Tin Lead version. The components are packaged in ESD shield bags to promote ESD awareness. Custom kits, individual boards, unassembled boards and parts are also available.

Radial Capacitor

Radial Capacitors