IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness reliability in space environments. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
IPC J-STD-001 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness durability in space. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC J-STD-001 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
Cable/Harness 100 Lecture & Hands-On
$1,200.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options
J-STD-001 Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
J-STD-001 Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
$1,025.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Modules 2-6 includes hands-on training exercises. J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers printed circuit boards, coating, encapsulation and staking, Module 4 emphasizes through-hole technology and Module 5 emphasizes surface mount technology and Module 6 focuses on inspection, inspection methodology, and process control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on projects.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Related products
-
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options
IPC J-STD-001 Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
IPC J-STD-001 Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00
CIT’s are certified for 2 years and must attend a 16-hour recertification class to maintain their certification status. CIT’s will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book and closed book exams are. Sections 2, 4 and 5 include hands-on training. Recertification required every 2 years. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Related products
-
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options
J-STD-001 Space Addendum For CIT/Lecture
J-STD-001 Space Addendum For CIT/Lecture
$1,090.00
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Description
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Related products
-
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness reliability in space environments. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
J-STD-001 Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness durability in space. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
IPC J-STD-001 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options
Basic Soldering/Lecture & Hands-On
Basic Soldering/Lecture & Hands-On
$1,200.00
Description
The Basic Soldering Course is modularized curriculum that can be customized to fit your company requirements. Training modules include component identification, electrostatic discharge, tools and equipment, materials, preparing to solder, wires and terminals, through-hole soldering, SMT soldering, localized cleaning, and basic through-hole and SMT rework.
Related products
-
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Attendance: The student shall not pass a class if they are absent for more than 10% of the overall class time or if the time missed is considered detrimental to the required level of training by the instructor.
Description
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Attendance: The student shall not pass a class if they are absent for more than 10% of the overall class time or if the time missed is considered detrimental to the required level of training by the instructor.
Related products
-
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
Cable/Harness 100 Lecture & Hands-On
$1,200.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00
Description
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
Cable/Harness 100 Lecture & Hands-On
$1,200.00 Select options -
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states:
5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel
(NASA and non-NASA). ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
This is the recertification course for staking and conformal coating per Marshall Space Fight Center standards.
ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
Attendance: The student shall not pass a class if they are absent for more than 10% of the overall class time or if the time missed is considered detrimental to the required level of training by the instructor.
Description
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states:
5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel
(NASA and non-NASA). ATTN: Retraining courses require an eye exam to be submitted prior to attending class. To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
Attendance: The student shall not pass a class if they are absent for more than 10% of the overall class time or if the time missed is considered detrimental to the required level of training by the instructor.
Related products
-
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options
IPC-A-600 Certified Standards Expert (CSE) Certification/Recertification Program/Lecture Based
IPC-A-600 Certified Standards Expert (CSE) Certification/Recertification Program/Lecture Based
$1,485.00
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CSE program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book and closed book exams are required. Recertification is required every 2 years to maintain certification.
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CSE program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book and closed book exams are required. Recertification is required every 2 years to maintain certification.
Related products
-
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIT program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book and closed book exams are required. Recertification is required every 2 years.
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIT program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book and closed book exams are required. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC J-STD-001 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIS program is modularized and will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous (Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book exams are required after each module. Recertification is required every 2 years.
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIS program is modularized and will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous (Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book exams are required after each module. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options