IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for…
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00
Description
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for maximum flexibility in meeting individuals training needs. The modules include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book exam is required after each module. Recertification is required every 2 years.
Related products
-
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options
J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the…
J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
$1,025.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Modules 2-6 includes hands-on training exercises. J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers printed circuit boards, coating, encapsulation and staking, Module 4 emphasizes through-hole technology and Module 5 emphasizes surface mount technology and Module 6 focuses on inspection, inspection methodology, and process control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on projects.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Related products
-
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting…
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control.Modules 2-6 includes hands-on training exercises. Each module consists of 8 classroom hours.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers PCB, Coating, Encapsulation and Staking, Module 4 emphasizes Through-Hole Technology, Module 5 emphasizes Surface Mount Technology and Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on training. Recertification required every 2 years.
Related products
-
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced…
J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
| Description |
|---|
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced…
J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
| Description |
|---|
Related products
-
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options
IPC J-STD-001H Certified Standards Expert (CSE) Recertification Program/Lecture
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section…
IPC J-STD-001H Certified Standards Expert (CSE) Recertification Program/Lecture
$1,320.00
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control.
Open book and closed book exams are required. Hands-On training is not a requirement for CSE. Recertification is required every 2 years to maintain certification.
Related products
-
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options
IPC 7711/7721 Certified Standards Expert (CSE) Certification Program/Lecture & Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sections 2-10 consist…
IPC 7711/7721 Certified Standards Expert (CSE) Certification Program/Lecture & Hands-On
$2,460.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sections 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for…
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00
Description
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for maximum flexibility in meeting individuals training needs. The modules include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book exam is required after each module. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001,…
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00
CIT’s are certified for 2 years and must attend a 16-hour recertification class to maintain their certification status. CIT’s will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book and closed book exams are. Sections 2, 4 and 5 include hands-on training. Recertification required every 2 years. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Related products
-
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist…
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options
