IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual training needs. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book exam is required after each Module. Recertification is required every 2 years.
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00
IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, is modeled after IPC-A-610; IPC’s most widely used standard with an international reputation as the source for end product acceptance criteria for consumer and high reliability printed circuit assemblies. IPC/WHMA-A-620 is the first industry consensus standard for cable and wire harness fabrication and installation.
Description
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual training needs. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book exam is required after each Module. Recertification is required every 2 years.IPC/WHMA-A-620D (CIS) Hands-On Lab
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion.
IPC/WHMA-A-620D (CIS) Hands-On Lab
$945.00
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion
Description
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting…

J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control.Modules 2-6 includes hands-on training exercises. Each module consists of 8 classroom hours.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers PCB, Coating, Encapsulation and Staking, Module 4 emphasizes Through-Hole Technology, Module 5 emphasizes Surface Mount Technology and Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on training. Recertification required every 2 years.
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is…
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00
Description
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
This initial training course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Initial training courses require an eye exam to be submitted prior to attending class.

NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00
Description
This initial training course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
IPC/WHMA-A-620 Certified Standards Expert (CSE) Certification Program/Lecture Based
This program provides a comprehensive instructor certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Application Specialist (CIS) training. Recertification is required every 2 years.

IPC/WHMA-A-620 Certified Standards Expert (CSE) Certification Program/Lecture Based
$2,050.00
Description
This program provides a comprehensive standards expert certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book and closed book exam is required. Recertification is required every 2 years.
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
This program provides a comprehensive instructor certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Application Specialist (CIS) training. Recertification is required every 2 years.
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00
Description
This program provides a comprehensive instructor certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Application Specialist (CIS) training. Recertification is required every 2 years.
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced…

J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
Description |
---|
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-5 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00
IPC/WHMA-A-620-S Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620. Training and Certification Program for Certified IPC Specialists (CIS). Day 1 consists of training and a written open book examination. Days 2-5 are workmanship training, demos and projects.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-5 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-5 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-5 are workmanship training, demos and projects. Recertification is required every 2 years.