NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class.
To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Description
This retraining course provides instruction to those who are responsible for building or inspecting electrical cables and harnesses per NASA-STD-8739.4, Crimping, Interconnecting Cables, Harnesses, and Wiring. Topics include wire and cable preparation, connector contact preparation and installation into connectors, crimp ring and backshell installation, installation of splices, installation of grounding wires, harness manufacturing techniques, quality control practices, and quality assurance measurements. All of the requirements contained in the standard are discussed. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739,4. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” it states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA).
ATTN: Retraining courses require an eye exam to be submitted prior to attending class. To participate in an Operator/Inspector retraining class the student must have previously completed the Initial training and have a current certification.
Related products
-
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options -
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00
This class provides skill-based training regarding soldering practices and processes as covered in the J-STD-001 and its companion documents. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book and closed book exams are. Sections 2, 4 and 5 include hands-on training. Recertification required every 2 years. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Related products
-
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options
IPC J-STD-001H CERTIFIED IPC TRAINER (CIT) CERTIFICATION PROGRAM/Lecture & Hands-On
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00
This class provides skill-based training regarding soldering practices and processes as covered in the J-STD-001 and its companion documents. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book and closed book exams are. Sections 2, 4 and 5 include hands-on training. Recertification required every 2 years. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
Related products
-
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00 Select options -
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options
J-STD-001H Space Addendum For CIT/Lecture
J-STD-001H Space Addendum For CIT/Lecture
$1,090.00
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Description
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Related products
-
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options -
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options
J-STD-001H Space Addendum For CIT/Lecture
J-STD-001H Space Addendum For CIT/Lecture
$1,090.00
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Description
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Related products
-
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options
J-STD-001H SPACE ADDENDUM FOR CIT/Lecture
J-STD-001H Space Addendum For CIT/Lecture
$1,090.00
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Description
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Related products
-
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00
Description
This is the 2 day recertification program for CITs. This program provides a comprehensive instructor certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Application Specialist (CIS) training. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness reliability in space environments. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00
IPC/WHMA-A-620 Space Addendum ensures cable and wire harness durability in space. Includes lecture, exam, and hands-on training. Recertification required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Description
IPC/WHMA-A-620 Space addendum provides additional requirements over those published in the IPC/WHMA-A-620 to ensure the performance of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Day 1 consists of Lecture and open book examination. Days 2-3 are workmanship training, demos and projects. Recertification is required every 2 years.
IPC/WHMA 620 Space Cert or Recert: Only CIS’s or CIT’s who have successfully completed the IPC/WHMA 620 Certification or Recertification Course can attend.
Related products
-
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options
IPC-A-600 Certified Standards Expert (CSE) Certification/Recertification Program/Lecture Based
IPC-A-600 Certified Standards Expert (CSE) Certification/Recertification Program/Lecture Based
$1,485.00
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CSE program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book and closed book exams are required. Recertification is required every 2 years to maintain certification.
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CSE program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards.
Open book and closed book exams are required. Recertification is required every 2 years to maintain certification.
Related products
-
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC J-STD-001H Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,070.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options