IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is…
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00
Description
This program is for anyone needing to renew their existing IPC-7711/7721 CIS Certification. This is a hands-on course. The CIS class is modularized to allow you to choose only the modules needed. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the…

J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
$1,025.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Modules 2-6 includes hands-on training exercises. J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers printed circuit boards, coating, encapsulation and staking, Module 4 emphasizes through-hole technology and Module 5 emphasizes surface mount technology and Module 6 focuses on inspection, inspection methodology, and process control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on projects.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Online IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general…
Online IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,440.00
Description
The CIT program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). The sections include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book and closed book exam is required. CITs are qualified to teach Certified IPC Specialist (CIS) training. Recertification is required every 2 years.
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for…
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00
Description
The CIS program utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production (Tin/Lead and Lead Free). This course is modularized to allow for maximum flexibility in meeting individuals training needs. The modules include the following topics general information, foreword, applicable documents, handling, soldering and high voltage, component damage & PCBAs, terminals connections, through-hole technology and jumper wires, surface mount assemblies & jumper wires, and hardware. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions. An open book exam is required after each module. Recertification is required every 2 years.
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced…

J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
Description |
---|
IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001,…

IPC J-STD-001H Certified IPC Trainer (CIT) Recertification Program/Lecture & Hands-On
$1,930.00
CIT’s are certified for 2 years and must attend a 16-hour recertification class to maintain their certification status. CIT’s will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. Section 1 is an introduction to the process requirements of J-STD-001, Section 2 focuses on wires and terminals, Section 3 covers PCB, Coating, Encapsulation and Staking, Section 4 emphasizes Through-Hole Technology, Section 5 emphasizes Surface Mount Technology and Section 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book and closed book exams are. Sections 2, 4 and 5 include hands-on training. Recertification required every 2 years. CIT’s are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs.
J-STD-001H Space Addendum For CIT/Lecture
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in…

J-STD-001H Space Addendum For CIT/Lecture
$1,090.00
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
Description
This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIT’s who have successfully completed the J-STD-001 Certification course can attend.
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual…
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00
IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, is modeled after IPC-A-610; IPC’s most widely used standard with an international reputation as the source for end product acceptance criteria for consumer and high reliability printed circuit assemblies. IPC/WHMA-A-620 is the first industry consensus standard for cable and wire harness fabrication and installation.
Description
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual training needs. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book exam is required after each Module. Recertification is required every 2 years.
J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the…

J-STD-001H Certified IPC Specialist (CIS) Recertification (Modules 1-6)/Lecture & Hands-On
$1,025.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Modules 2-6 includes hands-on training exercises. J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
This program is for anyone needing to renew their existing J-STD-001 CIS Certification. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers printed circuit boards, coating, encapsulation and staking, Module 4 emphasizes through-hole technology and Module 5 emphasizes surface mount technology and Module 6 focuses on inspection, inspection methodology, and process control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on projects.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-10 consist…
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.