IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/ Lecture Based
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIT program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book and closed book exams are required. Recertification is required every 2 years.
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIT program will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book and closed book exams are required. Recertification is required every 2 years.Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00 Select options
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/ Lecture Based
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIS program is modularized and will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous (Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book exams are required after each module. Recertification is required every 2 years.
IPC-A-600 Certified IPC Specialist (CIS) Training Certification/Recertification Program/Lecture Based
$960.00
Description
This course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection. The IPC-A-600, “The Acceptability of Printed Boards”, describes the preferred, acceptable, and nonconforming conditions that are either externally or internally observable on printed boards. The CIS program is modularized and will familiarize the student with IPC-A-600 “Acceptability of Printed Boards” document to include Introduction and Cleanliness Testing, Externally Observable Characteristics, Internally Observable Characteristics and Miscellaneous (Flexible and Rigid-Flex Printed Boards, and Metal Core and Flush Printed Boards. Open book exams are required after each module. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Retraining Course/Lecture & Hands-On
$840.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Section one is mandatory and consists of Common procedures. Sectionos 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book and closed book exam is required. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIS Certification/Lecture & Hands-On
$2,290.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Retraining Course/Lecture & Hands-On
$945.00 Select options -
IPC-A-600 Certified IPC Trainer (CIT) Certification/Recertification Program/Lecture Based
$2,020.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture & Hands-On
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00
Description
This class provides skill-based training regarding rework, repair and modification procedures covered in the IPC-7711 and IPC-7721 documents. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-10 consist of; Wire Splicing Procedures, Conformal Coating, Through Hole component removal and installation, Chip and MELF removal and installation, Gull Wing removal and installation, J-lead removal and installation, BGA (Lecture only/Optional), Laminate Repair, and Circuit Repair. An open book exam is required after Module 1. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
IPC-A-610 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options -
Basic Soldering/Lecture & Hands-On
$1,200.00 Select options
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1 – 6)/Lecture & Hands-On
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers PCB, Coating, Encapsulation and Staking, Module 4 emphasizes Through-Hole Technology, Module 5 emphasizes Surface Mount Technology and Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on training. Recertification required every 2 years.
J-STD-001H Certified IPC Specialist (CIS) Certification (Modules 1-6)/Lecture & Hands-On
$1,575.00
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes PCB requirements Conformal Coating Encapsulation and Staking and Module 4 emphasizes through-hole technology. Module 5 emphasizes Surface Mount Technology. Module 6 focuses on Inspection, Inspection Methodology, and Process Control.Modules 2-6 includes hands-on training exercises. Each module consists of 8 classroom hours.
Description
This program provides an in-depth look at the J-STD-001 document. The course reviews this document and helps students learn how to interpret the criteria. This program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 covers PCB, Coating, Encapsulation and Staking, Module 4 emphasizes Through-Hole Technology, Module 5 emphasizes Surface Mount Technology and Module 6 focuses on Inspection, Inspection Methodology, and Process Control. Open book exams are required after each module. Modules 2, 4 and 5 include hands-on training. Recertification required every 2 years.
Related products
-
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620 Instructor (CIT) Hands-On Lab
$350.00 Select options
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual training needs. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book exam is required after each Module. Recertification is required every 2 years.
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00
IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, is modeled after IPC-A-610; IPC’s most widely used standard with an international reputation as the source for end product acceptance criteria for consumer and high reliability printed circuit assemblies. IPC/WHMA-A-620 is the first industry consensus standard for cable and wire harness fabrication and installation.
Description
This program provides a comprehensive operator certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly. This course is modularized to allow for maximum flexibility in meeting individual training needs. This training will familiarize the student with IPC/WHMA-A-620 “Requirements and Acceptance for Cable and Harness Assemblies” document to include the general requirements of the specification and related documents, the difference between the classes of product, and define the acceptance criteria for various conditions. An open book exam is required after each Module. Recertification is required every 2 years.
Related products
-
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA). ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00
Description
This course provides training for operators who will build or inspect hardware to NASA-STD-8739.1, Polymeric Applications. Topics include staking, conformal coating, potting, and bonding. Practical exercises include demonstrating inspection techniques for these polymeric material applications and demonstration of students’ competency for using these techniques in a manner that produces hardware that meets the requirements of the standard. STI has SMA-Sponsored Level B instructors to the NASA-STD-8739.1. Note: NASA-STD-8739.6 “Implementation Requirements for NASA Approved Workmanship Standards” states: 5.2.2 SMA-Sponsored Level B instructors may train operators and inspectors inside and outside of their own organization as well as U.S. government civil service personnel (NASA and non-NASA). ATTN: Initial training courses require an eye exam to be submitted prior to attending class.
Related products
-
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Recertification Program/Lecture Based
$2,050.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options -
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program/Lecture & Hands-On
$1,010.00 Select options
IPC/WHMA-A-620D (CIS) Hands-On Lab
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion.
IPC/WHMA-A-620D (CIS) Hands-On Lab
$945.00
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion
Description
IPC has developed an 8-hour hands-on lab based on the IPC/WHMA-A-620’s acceptability requirements. This hands-on lab covers cable and harness fabrication from stripping and tinning of wires to crimping of contacts while reinforcing the acceptability requirements for all classes of product. Upon completion of this course the student will receive an IPC certificate of completion
Related products
-
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program/Lecture & Hands-On
$3,080.00 Select options -
IPC-A-610 Certified IPC Specialist (CIS) Certification/Recertification Training Program/Lecture Based
$1,010.00 Select options -
NASA-STD-8739.1 Polymeric Application on Electronic Assemblies Initial Training/Lecture & Hands-On
$1,320.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
| Description |
|---|
Related products
-
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Certification Program/Lecture &Hands-On
$1,900.00 Select options -
IPC/WHMA-A-620 Space CIT Certification/Lecture & Hands-On
$2,780.00 Select options -
IPC/WHMA-A-620-Space CIS Recertification/Lecture & Hands-On
$1,400.00 Select options -
IPC/WHMA-A-620-Space CIT Recertification/Lecture & Hands-On
$1,700.00 Select options
J-STD-001H Space Addendum for CIS/Lecture Based
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001H Space Addendum for CIS/Lecture Based
$380.00
This is optional Module 7 of the J-STD-001 training program. This course provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. Only CIS’s who have successfully completed the J-STD-001 Certification course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Description
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space. This program consists of a lecture which will identify and review each section of the addendum, followed by an open book exam. There are no workmanship requirements for this module. Only CIS’s who have successfully completed the J-STD-001 Certification/Recertification Course can attend.
J-STD-001 Space Cert or Recert: There are no workmanship requirements for this module. Only CIS’s or CIT’s who have successfully completed the J-STD-001 Certification or Recertification Course can attend.
Additional information
| Description |
|---|
Related products
-
IPC/WHMA-A-620 Certified IPC Trainer (CIT) Certification Program/Lecture Based
$2,680.00 Select options -
IPC 7711/7721 Certified IPC Trainer (CIT) Recertification Program/Lecture Hands-On
$2,010.00 Select options -
IPC/WHMA-A-620 Certified IPC Specialist (CIS) Certification/Recertification Program (All Modules)/Lecture Based
$1,010.00 Select options -
NASA-STD-8739.4 Crimp Cable & Harness Initial Training/Lecture & Hands-On
$1,260.00 Select options